Main Pages

Best Selling Products

External Spring Kit - Norton Short Roadholder Forks

External Spring Kit - Norton Short Roadholder Forks


Price: £60.00 (Excluding VAT at 20%)

External spring kit for the Norton Short-Roadholder forks comprising a pair of chromed progressive fork springs, internal aluminium fork rods and machined alloy fork seal holders. The fork seal holders have recesses in them for tightening. They also have a seal in the top which acts as a "bed" for the fork springs. This does not replace the fork seal in the forks themsevles. The aluminium rods are slightly longer than standard to allow for more adjustment. This External Spring Kit is made by Dresda with Tritons in mind.
find out more

 

Oil Pressure Switch - Smiths Type

Oil Pressure Switch - Smiths Type


Price: £12.99 (Excluding VAT at 20%)

Oil pressure switch - Smiths type
find out more

 

Fork Top Nut Washer - Triumph BSA - 97-4166

Fork Top Nut Washer - Triumph BSA - 97-4166


Price: £0.75 (Excluding VAT at 20%)

Fork Top Nut Washer for Triumph and BSA Forks. The washer is galvanised steel. The OE part number is 97-4166
find out more

 

Chromed Tail Light Bracket with Stop and Tail Light - Custom

Chromed Tail Light Bracket with Stop and Tail Light - Custom


Price: £29.50 (Excluding VAT at 20%)

Chromed tail light bracket with replica Lucas L564 stop and tail light. The chromed tail light is approx 140 mm long from the back of the bracket to the end of the tail light and approx 180mm wide across the number plate mount. This tail light is ideal for custom bikes. There is a single mounting hole at the back of the tail light and 2 beneath the stop and tail light for fixing to the mudguard. There are 2 slots for fixing the number plate.
find out more

 

Outer Gearbox Gasket - Triumph - 71-1448

Outer Gearbox Gasket - Triumph - 71-1448


Price: £2.00 (Excluding VAT at 20%)

Gasket/Joint Washer for the outer gearbox on Triumph unit 750cc models: T140, TR7.
find out more

 

Inner Gearbox Gasket/Joint Washer - Triumph - 71-3096

Inner Gearbox Gasket/Joint Washer - Triumph - 71-3096


Price: £2.00 (Excluding VAT at 20%)

Gasket/Joint Washer for inner gearbox on Triumph 650c and 750cc unit engines. The OE part number is 71-3096.
find out more

 

New Products

Set of Yokes - Triumph T120, T140 Oil in Frame

Set of Yokes - Triumph T120, T140 Oil in Frame


Price: £50.00 (Excluding VAT at 20%)

A set of yokes with stem nut for the Triumph T140 oil in frame, disc brake models. It has 7 3/4 inch centres. The stem is 3/4 inch diameter. The steering lock needs to be removed and they need painting or enamelling.
find out more

 

Bottom Yoke - Triumph - 97-3660

Bottom Yoke - Triumph - 97-3660


Price: £50.00 (Excluding VAT at 20%)

Bottom yoke for Triumph with the casting number 97-3660 cast into it. The stem is 1 inch diameter and it has 6 3/4 inch centres. The holes for the stanchions/fork legs are approx 1 1/4 inches in diameter.
find out more

 

Bottom Yoke - Triumph - 97-2289

Bottom Yoke - Triumph - 97-2289


Price: £50.00 (Excluding VAT at 20%)

Bottom yoke with 1 inch (25mm) diameter stem. The bottom yokes have 6 3/4 inch centres and have the casting number 97-2289. The holes for teh fork stanchions/legs are 1 1/4 inch diameter.
find out more

 

Alloy Bottom Yokes - BSA B25 and B50, Triumph TR25 and Hurricane

Alloy Bottom Yokes - BSA B25 and B50, Triumph TR25  and Hurricane


Price: £75.00 (Excluding VAT at 20%)

Alloy bottom yokes for the BSA B25 and B50 models and also for the Triumph TR25. These yokes have a chromed stem nut on the stem. They have 6 3/4 inch centres. These are second hand, original bottom yokes in very good condition.
find out more

 

Top Yoke - BSA - Early A50 and A65

Top Yoke - BSA - Early A50 and A65


Price: £30.00 (Excluding VAT at 20%)

Top yoke for early BSA A50 and A65 models. The yokes have handlebar clamps fitted (chromed). It also has a steering lock fitted but there is no key so this would need replacing. The yokes are painted/enamelled black. The casting number is 68-5049. It is in good condition without any damage.
find out more

 

Top Yoke - Triumph - 97-1528A

Top Yoke - Triumph - 97-1528A


Price: £30.00 (Excluding VAT at 20%)

An original top yoke fitted to Triumph T120 and TR6 650cc models in the mid 1960s. The casting number is H1522. This yoke has holes with bushes fitted for "P" type handlebar clamps. It is painted/enamelled black would need re-painting. It is in good condition - not bent and there is no damage. The OE part number is H1528A or 97-1528A.
find out more

 

On Line Catalogue  | Handlebars |  Clip On Handlebars

Clip On Handlebars

On Line Catalogue  | Handlebars |  Clip On Handlebars

Dresda Clip on Handlebars 34mm 1 5/16 inch fitting

Dresda Clip on Handlebars 34mm 1 5/16 inch fitting

In stock


Price: £55.00 (Excluding VAT at 20%)

Quantity:

Pair of chromed clip on handlebars made by Dresda. These have a 34mm 5/16" clamp fitting and will fit Norton Roadholder forks as well as any other 34mm fork legs. The handlebar clamp has a 2 bolt fitting. The handlebar is 8 inches long. Click for more...

Dresda Clip On Handlebars 34mm 1 5/16 inch fitting - cross-over type

Dresda Clip On Handlebars 34mm 1 5/16 inch fitting - cross-over type

In stock


Price: £55.00 (Excluding VAT at 20%)

Quantity:

Chromed clip-on handlebars for 34mm fork stanchions. These are made by Dresda and will fit Norton Short Roadholder stanchions and other 34mm fork legs. The handlebar is 10 inches long (255mm). The clamp has 2 bolts to secure it to the fork leg. These handlebars are cross-over type - the handlebar is secured across the side of the clamp. Click for more...

John tickle Racing Clip On Handlebars 38mm 1 1/2 in fitting

John tickle Racing Clip On Handlebars 38mm 1 1/2 in fitting

In stock


Price: £50.00 (Excluding VAT at 20%)

Quantity:

A pair of new old stock, chromed clip on handlebars made by John Tickle Racing. The handlebars have a 38mm 1 1/2 inch diameter fitting. The fastening is in two halves with a bolt on each side to fasten it. The handlebar itself is 8 inches long from the weld on the fork leg fitment. They have John Tickle Racing stamped onto the fork leg fitment. Click for more...

Dunstall Clip on Handlebars 28mm 1 1/8 inch fitting

Dunstall Clip on Handlebars 28mm 1 1/8 inch fitting

In stock


Price: £45.00 (Excluding VAT at 20%)

Quantity:

A pair of new old stock, chromed clip on handlebars made by Paul Dunstall. The handlebars have a 28mm / 1 1/8 inch diameter fitting. They have a bracket to fit over teh fork leg/stanchion which is then tightened with a bolt (not supplied). The handlebar itself is 8.5 inches long from the weld on the fork leg fitment. They have Dunstall stamped into the bracket. Click for more...

Dresda Swan Neck Clip on Handlebars 34mm 1 5/16 inch fitting

Dresda Swan Neck Clip on Handlebars 34mm 1 5/16 inch fitting

In stock


Price: £75.00 (Excluding VAT at 20%)

Quantity:

A pair of swan-neck, chromed clip on handlebars manufactured by Dresda. These have 34mm 1 5/16 inch fitment and have 2 bolts on each fork leg fitting. The rise is 100mm 4 inches long and the bar measures 260mm 10 1/4 inches. Click for more...

Clip on Handlebars 28mm 1 1/8 inch fitting

Clip on Handlebars 28mm 1 1/8 inch fitting

In stock


Price: £45.00 (Excluding VAT at 20%)

Quantity:

A pair of new old stock, chromed clip on handlebars The handlebars have a 28mm / 1 1/8 inch diameter fitting. They are fastened with 1 bolt per handlebar. The handlebar itself is 8.5 inches long from the weld on the fork leg fitment. Click for more...

Clip on Handlebars 28mm 1 1/8 inch fitting - cross-over type

Clip on Handlebars 28mm 1 1/8 inch fitting - cross-over type

In stock


Price: £45.00 (Excluding VAT at 20%)

Quantity:

A pair of new old stock, chromed clip on handlebars. The handlebar crosses across the fork leg fitting to reduce the amount of room they take. The handlebars have a 28mm - 1 1/8 inch diameter fitting. They are fastened with 2 bolts per handlebar. The handlebar itself is 185 mm 7.25 inches long from the weld on the fork leg fitment. Click for more...

Clip on Handlebars 28mm 1 1/8 inch fitting - cross-over type

Clip on Handlebars 28mm 1 1/8 inch fitting - cross-over type

In stock


Price: £45.00 (Excluding VAT at 20%)

Quantity:

A pair of new old stock, chromed clip on handlebars. The handlebar crosses across the fork leg fitting to reduce the amount of room they take. The handlebars have a 28mm - 1 1/8 inch diameter fitting. They are fastened with 2 bolts per handlebar - the bolts are not supplied. The handlebar itself is 185 mm 7.25 inches long from the weld on the fork leg fitment. Click for more...

Clip on Handlebars 32mm 1 1/4 inch fitting - Triumph 1 inch bars

Clip on Handlebars 32mm 1 1/4 inch fitting - Triumph 1 inch bars

In stock


Price: £45.00 (Excluding VAT at 20%)

Quantity:

A pair of new old stock, chromed clip on handlebars. The handlebars have a 32mm / 1 1/4 inch diameter fitting. The fork leg fitting has two bolts for fastening. The handlebar itself is 8 inches long from the weld on the fork leg fitment and it has a 1 inch diameter bar. This is reduced on the right hand side to 15/16" 24mm for the long pre-unit throttle. Click for more...

Clip on Handlebars 34mm 1 5/16 inch fitting - Triumph 1 inch bars

Clip on Handlebars 34mm 1 5/16 inch fitting - Triumph 1 inch bars

In stock


Price: £45.00 (Excluding VAT at 20%)

Quantity:

A pair of new old stock, chromed clip on handlebars. The handlebars have a 34mm / 1 5/16 inch diameter fitting. The fork leg fitting has two bolts for fastening. The handlebar itself is 8 inches long from the weld on the fork leg fitment and it has a 1 inch diameter bar. This is reduced on the right hand side to 15/16" 24mm for the long pre-unit throttle. Click for more...

Clip on Handlebars 45mm 1 3/4 inch fitting

Clip on Handlebars 45mm 1 3/4 inch fitting

In stock


Price: £45.00 (Excluding VAT at 20%)

Quantity:

A pair of new old stock, chromed clip on handlebars. The handlebars have a 45mm / 1 3/4 inch diameter fitting. The part that fits to the fork leg is in 2 halves with one bolt on each side. The handlebar itself is 8 inches long from the weld on the fork leg fitment. Click for more...

On Line Catalogue  | Handlebars |  Clip On Handlebars

Chris Knight Motorcycles Ltd