A pair of genuine Amal alloy handlebar levers with aluminium slot-in adjusters. These levers are made in Spain and packed in te Amal, Tarreche SA box. These are much better quality than the replica ones and preferred by trials and scrambles riders. Click for more...

A pair of alloy control levers - brake and clutch - with polished alloy levers and black handlebar clamps. These have a brass, screw-in cable adjusters. Click for more...

A pair of chromed handlebar brake and clutch levers with integral air and magneto levers to fit 1 inch (25 mm) diameter handlebars. These are replicas of the Doherty 100/200P levers. The brake and clutch lever blades do not have ball-ends and are suitable for motorcycles before about 1960. The air/choke and magneto levers both have ball-ends on the operating levers. They have a lovely, bright and shiny chrome finish. They do not have cable adjusters. Press More for further dimensions/measurements and a photograph of the back of the levers. Click for more...

A pair of chromed handlebar brake and clutch levers with integral air and magneto levers to fit 7/8 inch (22mm) diameter handlebars. These are replicas ofthe Doherty 100/200P levers. The brake and clutch lever blades do not have ball-ends and are suitable for motorcycles before about 1960. The air/choke and magneto levers both have ball-ends on the operating levers. They have a lovely, bright and shiny chrome finish. They do not have cable adjusters. Press More for further dimensions/measurements and a photograph of the back of the levers. Click for more...

A pair of alloy (aluminium) Tomaselli replica brake and clutch levers. These levers have a rotary cable adjuster. There is a rubber gaiter where the cable connects to the lever bracket and the ball-end also has a rubber cover. The handlebar clamp fastens with 2 bolts. These are lovely light-weight levers with good leverage. Press More for further dimensions/measurements and a photograph of the back of the levers. Click for more...

A pair of chromed handlebar levers for the brake and clutch for Triumph unit motorcycles. These are a replica of Triumph part numbers 60-2072 and 60-2074. They have slot-in cable adjusters and ball-end on the lever blades. The handlebar clamp fastens with 2 bolts and is vertical to the lever. The chrome finish is bright and shiny. Press More for dimensions/measurements and a photograph of the back of the levers. Click for more...

A pair of chromed, ball ended brake and clutch levers for 7/8 inch (22mm) diameter handlebars. The levers have a screw-in cable adjuster. The handlebar clamp fastens with 2 bolts. They have a bright and shiny chrome finish. These are a replica of the Doherty 208PA handlebar levers. Press More for dimensions/measurements and a photograph of the back of the levers. Click for more...

A pair of chromed steel handlebars brake and clutch levers for 1 inch (25mm) diameter handlebars. These levers are a replica of the Doherty 407P lever. The levers are blade type and do not have ball ends. They do not have adjusters. These would have been fitted to motorcycles in the 1950's and earlier before ball-ended levers were introduced. The chrome is bright and shiny. Press more for dimensions/measurements and a photographs of the back of the levers. Click for more...

A pair of chromed steel handlebars brake and clutch levers for 7/8 inch (22mm) diameter handlebars. These levers are a replica of the Doherty 207P lever. The levers are blade type and do not have ball ends. They do not have adjusters. These would have been fitted to motorcycles in the 1950's and earlier before ball-ended levers were introduced. The chrome is bright and shiny. Press more for dimensions/measurements and a photographs of the back of the levers. Click for more...

Chromed clutch and brake lever for 7/8 inch (22 mm) handlebars. The brake lever has an integral air / choke lever. Both brake and clutch lever had a slide in cable adjuster. The levers are ball-ended. These are very good quality levers. This type of lever was fitted to Triumph models in 1970. Click for more...

A pair of replica Amal alloy levers with the star shaped cable adjuster. The brake and clutch lever fit 7/8 inch (22 mm) handlebars. The handlebar clamp is chromed steel and fastens with 2 screws into the body of the lever. The levers have ball-ends. Click for more...

A pair of control levers - brake and clutch for 7/8 inch (22 mm) handlebars with slide-in cable adjusters. The levers are a copy of the Amal levers. They fasten to the handlebars with an aluminium bracket which fastens with 2 screws. The levers are ball ended. Click for more...

Alloy Brake Lever to fit the Lucas 169SA alloy switch cluster fitted to Triumph and BSA oil in frame models. The lever is second hand and is therefore not bright and shiny but is an original, genuine lever and therefore will fit properly! Click for more...

Alloy Clutch Lever to fit the Lucas 169SA alloy switch cluster fitted to Triumph and BSA oil in frame models. The lever is second hand and is therefore not bright and shiny but is an original, genuine lever and therefore will fit properly! Click for more...

A chromed decompression lever with fitting for 1 inch (25mm) handlebars. The lever is an original one and the chrome is bright and shiny. It would accommodate a 1/4 inch cable nipple. The lever is 4 inches long (100mm). More...

Chromed magneto lever with ball-end (for left hand side). This mag lever is made to fit a 1 inch (25 mm) handlebar. This lever has a bright, shiny chromed finish. Click for more...

Chromed magneto lever with ball-end (for left hand side). This mag lever is made to fit a 7/8 inch (22mm) handlebar. This lever has a bright, shiny chromed finish. Click for more...

Chromed magneto lever with flat lever end (for left hand side). This mag lever is made to fit a 1 inch (25 mm) handlebar. This lever has a bright, shiny chromed finish. Click for more...

Chromed magneto lever with flat lever end (for left hand side). This mag lever is made to fit a 7/8 inch (22mm) handlebar. This lever has a bright, shiny chromed finish. Click for more...

Choke or air lever made from aluminium to fit a 7/8 inch (22mm) handlebar by Superpratic. The handlebar bracket is made of steel and so is the chromed screw in the centre of the lever. Thie lever has a ball end. The name Superpratic is stamped nito the round centre of the lever. This is lovely quality and when polished would enhance any classic motorcycle. The chromed screw has some pitting on it. More...

Chromed air or choke lever with ball-end. This choke lever is made to fit a 1 inch (25mm) handlebar. This lever has a bright, shiny chromed finish. Click for more...

Chromed air or choke lever with ball-end. This choke lever is made to fit a 7/8 inch (22mm) handlebar. This lever has a bright, shiny chromed finish. Click for more...

Chromed air or choke lever with flat lever end. This choke lever is made to fit a 1 inch (25mm) handlebar. This lever has a bright, shiny chromed finish. Click for more...

Chromed air or choke lever with flat lever end. This choke lever is made to fit a 7/8 inch (22mm) handlebar. This lever has a bright, shiny chromed finish. Click for more...

Slide-in cable adjusters for clutch and brake levers Click for more...