Price: £60.00 (Excluding VAT at 20%)

External spring kit for the Norton Short-Roadholder forks comprising a pair of chromed progressive fork springs, internal aluminium fork rods and machined alloy fork seal holders. The fork seal holders have recesses in them for tightening. They also have a seal in the top which acts as a "bed" for the fork springs. This does not replace the fork seal in the forks themsevles. The aluminium rods are slightly longer than standard to allow for more adjustment. This External Spring Kit is made by Dresda with Tritons in mind.
find out more

Price: £12.99 (Excluding VAT at 20%)

Oil pressure switch - Smiths type
find out more

Price: £0.75 (Excluding VAT at 20%)

Fork Top Nut Washer for Triumph and BSA Forks. The washer is galvanised steel. The OE part number is 97-4166
find out more

Price: £29.50 (Excluding VAT at 20%)

Chromed tail light bracket with replica Lucas L564 stop and tail light. The chromed tail light is approx 140 mm long from the back of the bracket to the end of the tail light and approx 180mm wide across the number plate mount. This tail light is ideal for custom bikes. There is a single mounting hole at the back of the tail light and 2 beneath the stop and tail light for fixing to the mudguard. There are 2 slots for fixing the number plate.
find out more

Price: £2.00 (Excluding VAT at 20%)

Gasket/Joint Washer for the outer gearbox on Triumph unit 750cc models: T140, TR7.
find out more

Price: £2.00 (Excluding VAT at 20%)

Gasket/Joint Washer for inner gearbox on Triumph 650c and 750cc unit engines. The OE part number is 71-3096.
find out more

Price: £50.00 (Excluding VAT at 20%)

A set of yokes with stem nut for the Triumph T140 oil in frame, disc brake models. It has 7 3/4 inch centres. The stem is 3/4 inch diameter. The steering lock needs to be removed and they need painting or enamelling.
find out more

Price: £50.00 (Excluding VAT at 20%)

Bottom yoke for Triumph with the casting number 97-3660 cast into it. The stem is 1 inch diameter and it has 6 3/4 inch centres. The holes for the stanchions/fork legs are approx 1 1/4 inches in diameter.
find out more

Price: £50.00 (Excluding VAT at 20%)

Bottom yoke with 1 inch (25mm) diameter stem. The bottom yokes have 6 3/4 inch centres and have the casting number 97-2289. The holes for teh fork stanchions/legs are 1 1/4 inch diameter.
find out more

Price: £75.00 (Excluding VAT at 20%)

Alloy bottom yokes for the BSA B25 and B50 models and also for the Triumph TR25. These yokes have a chromed stem nut on the stem. They have 6 3/4 inch centres. These are second hand, original bottom yokes in very good condition.
find out more

Price: £30.00 (Excluding VAT at 20%)

Top yoke for early BSA A50 and A65 models. The yokes have handlebar clamps fitted (chromed). It also has a steering lock fitted but there is no key so this would need replacing. The yokes are painted/enamelled black. The casting number is 68-5049. It is in good condition without any damage.
find out more

Price: £30.00 (Excluding VAT at 20%)

An original top yoke fitted to Triumph T120 and TR6 650cc models in the mid 1960s. The casting number is H1522. This yoke has holes with bushes fitted for "P" type handlebar clamps. It is painted/enamelled black would need re-painting. It is in good condition - not bent and there is no damage. The OE part number is H1528A or 97-1528A.
find out more