Main Pages

Best Selling Products

External Spring Kit - Norton Short Roadholder Forks

External Spring Kit - Norton Short Roadholder Forks


Price: £60.00 (Excluding VAT at 20%)

External spring kit for the Norton Short-Roadholder forks comprising a pair of chromed progressive fork springs, internal aluminium fork rods and machined alloy fork seal holders. The fork seal holders have recesses in them for tightening. They also have a seal in the top which acts as a "bed" for the fork springs. This does not replace the fork seal in the forks themsevles. The aluminium rods are slightly longer than standard to allow for more adjustment. This External Spring Kit is made by Dresda with Tritons in mind.
find out more

 

Oil Pressure Switch - Smiths Type

Oil Pressure Switch - Smiths Type


Price: £12.99 (Excluding VAT at 20%)

Oil pressure switch - Smiths type
find out more

 

Fork Top Nut Washer - Triumph BSA - 97-4166

Fork Top Nut Washer - Triumph BSA - 97-4166


Price: £0.75 (Excluding VAT at 20%)

Fork Top Nut Washer for Triumph and BSA Forks. The washer is galvanised steel. The OE part number is 97-4166
find out more

 

Chromed Tail Light Bracket with Stop and Tail Light - Custom

Chromed Tail Light Bracket with Stop and Tail Light - Custom


Price: £29.50 (Excluding VAT at 20%)

Chromed tail light bracket with replica Lucas L564 stop and tail light. The chromed tail light is approx 140 mm long from the back of the bracket to the end of the tail light and approx 180mm wide across the number plate mount. This tail light is ideal for custom bikes. There is a single mounting hole at the back of the tail light and 2 beneath the stop and tail light for fixing to the mudguard. There are 2 slots for fixing the number plate.
find out more

 

Outer Gearbox Gasket - Triumph - 71-1448

Outer Gearbox Gasket - Triumph - 71-1448


Price: £2.00 (Excluding VAT at 20%)

Gasket/Joint Washer for the outer gearbox on Triumph unit 750cc models: T140, TR7.
find out more

 

Inner Gearbox Gasket/Joint Washer - Triumph - 71-3096

Inner Gearbox Gasket/Joint Washer - Triumph - 71-3096


Price: £2.00 (Excluding VAT at 20%)

Gasket/Joint Washer for inner gearbox on Triumph 650c and 750cc unit engines. The OE part number is 71-3096.
find out more

 

New Products

Set of Yokes - Triumph T120, T140 Oil in Frame

Set of Yokes - Triumph T120, T140 Oil in Frame


Price: £50.00 (Excluding VAT at 20%)

A set of yokes with stem nut for the Triumph T140 oil in frame, disc brake models. It has 7 3/4 inch centres. The stem is 3/4 inch diameter. The steering lock needs to be removed and they need painting or enamelling.
find out more

 

Bottom Yoke - Triumph - 97-3660

Bottom Yoke - Triumph - 97-3660


Price: £50.00 (Excluding VAT at 20%)

Bottom yoke for Triumph with the casting number 97-3660 cast into it. The stem is 1 inch diameter and it has 6 3/4 inch centres. The holes for the stanchions/fork legs are approx 1 1/4 inches in diameter.
find out more

 

Bottom Yoke - Triumph - 97-2289

Bottom Yoke - Triumph - 97-2289


Price: £50.00 (Excluding VAT at 20%)

Bottom yoke with 1 inch (25mm) diameter stem. The bottom yokes have 6 3/4 inch centres and have the casting number 97-2289. The holes for teh fork stanchions/legs are 1 1/4 inch diameter.
find out more

 

Alloy Bottom Yokes - BSA B25 and B50, Triumph TR25 and Hurricane

Alloy Bottom Yokes - BSA B25 and B50, Triumph TR25  and Hurricane


Price: £75.00 (Excluding VAT at 20%)

Alloy bottom yokes for the BSA B25 and B50 models and also for the Triumph TR25. These yokes have a chromed stem nut on the stem. They have 6 3/4 inch centres. These are second hand, original bottom yokes in very good condition.
find out more

 

Top Yoke - BSA - Early A50 and A65

Top Yoke - BSA - Early A50 and A65


Price: £30.00 (Excluding VAT at 20%)

Top yoke for early BSA A50 and A65 models. The yokes have handlebar clamps fitted (chromed). It also has a steering lock fitted but there is no key so this would need replacing. The yokes are painted/enamelled black. The casting number is 68-5049. It is in good condition without any damage.
find out more

 

Top Yoke - Triumph - 97-1528A

Top Yoke - Triumph - 97-1528A


Price: £30.00 (Excluding VAT at 20%)

An original top yoke fitted to Triumph T120 and TR6 650cc models in the mid 1960s. The casting number is H1522. This yoke has holes with bushes fitted for "P" type handlebar clamps. It is painted/enamelled black would need re-painting. It is in good condition - not bent and there is no damage. The OE part number is H1528A or 97-1528A.
find out more

 

On Line Catalogue  | Brakes and Wheels | Wheels |  Wheels and Hubs

Wheels and Hubs

On Line Catalogue  | Brakes and Wheels | Wheels |  Wheels and Hubs

Conical Wheel - Rear - Built into Akront Alloy Rim - Triumph - BSA

Conical Wheel - Rear - Built into Akront Alloy Rim - Triumph - BSA

In stock


Price: £395.00 (Excluding VAT at 20%)

Quantity:

A bright and shiny, polished Triumph and BSA rear conical hub with sprocket built into a polished, flanged, Akront alloy wheel rim. The sprocket 47 teeth. The rim is an Akront 19 inch rim and is 3 inches wide. It has the number 19" -2.15-40-S-1289 E DOT Spain stamped into the side of the rim. The spokes are stainless steel. The wheel has never been fitted and is in superb condition. Click for more...


Related products:

1. Wheel Bearing - Front and Rear Drum Brakes and Conical Rear Hub - 37-0653
2. Brake Plate - Rear Conical Hub - Triumph BSA - 37-3857
3. Brake Shoes - BSA Triumph Conical Rear Hub - 37-3925 37-3926

Norton Rear Wheel Hub - Complete - Norton Dominator, Atlas, 650

Norton Rear Wheel Hub - Complete - Norton Dominator, Atlas, 650

In stock


Price: £135.00 (Excluding VAT at 20%)

Quantity:

Norton rear wheel hub complete with brake drum, brake plate, brake shoes, brake arm, and spindle. The brake drum has a 5/8 x 3/8 inch sprocket suitable for the Norton Dominator, Atlas and 650. This is second hand and in very good condition. Ready to build into a wheel. Click for more...

Rear Conical Hub - Triumph BSA - 37-3773

Rear Conical Hub - Triumph BSA - 37-3773

In stock


Price: £120.00 (Excluding VAT at 20%)

Quantity:

Rear conical brake drum and hub as fitted to Triumph and BSA Models in the early 1970's. This is also used on other Specials including Tritons. The conical hub is used and is in good condition. It has been polished and is nice and shiny. The threads all look good. This hub is one of the earlier ones with the internal thread securing the wheel bearing. The wheel has bearings and the bearing retainer ring. Click on the More button for another photograph and more details. It has the OE Part No 37-3773. Click for more...


Related products:

1. Brake Plate - Rear Conical Hub - Triumph BSA - 37-3857
2. Wheel Bearing - Front and Rear Drum Brakes and Conical Rear Hub - 37-0653
3. Rear Sprocket - Triumph Conical Hub - 47T - 37-3747

Conical Hub - Front - Triumph BSA - 37-3658

Conical Hub - Front - Triumph BSA - 37-3658

In stock


Price: £90.00 (Excluding VAT at 20%)

Quantity:

Front 8 inch Conical Hub for Triumph and BSA motorcycles. The brake surface is very good. This is an second hand/used brake/wheel hub but in excellent condition. The OE part number is 37-3658. Click for more...


Related products:

1. Wheel Bearing - Front and Rear Drum Brakes and Conical Rear Hub - 37-0653

Conical Hub - Black - Front - Triumph BSA 37-3658

Conical Hub - Black - Front - Triumph BSA 37-3658

In stock


Price: £90.00 (Excluding VAT at 20%)

Quantity:

Conical front hub for Triumph. This is a new old stock hub with black finish. This would pbe an ideal partner the black rear conical hub for that Manx look. The OE part number is 37-3658 Click for more...

On Line Catalogue  | Brakes and Wheels | Wheels |  Wheels and Hubs

Chris Knight Motorcycles Ltd