Price: £18.00 (Excluding VAT at 20%)

Chromed twistgrip with metal tube to fit 7/8 inch (22mm) handlebars. This is for a single cable. It is the type fitted to many 1960's and 1970's Triumph models and a replica of the Amal 364 throttle.
find out more

Price: £60.00 (Excluding VAT at 20%)

External spring kit for the Norton Short-Roadholder forks comprising a pair of chromed progressive fork springs, internal aluminium fork rods and machined alloy fork seal holders. The fork seal holders have recesses in them for tightening. They also have a seal in the top which acts as a "bed" for the fork springs. This does not replace the fork seal in the forks themsevles. The aluminium rods are slightly longer than standard to allow for more adjustment. This External Spring Kit is made by Dresda with Tritons in mind.
find out more

Price: £55.00 (Excluding VAT at 20%)

Set of 4 finned rocker box caps in alloy with "O" ring for pre unit Triumph models.
find out more

Price: £35.00 (Excluding VAT at 20%)

Genuine Lucas ammeter 1 1/2 inch diameter across the body. The ammeter has a black face with white detail. The ammeter is new old stock. The dial reads 30-0-30.
find out more

Price: £50.00 (Excluding VAT at 20%)

Genuine Lucas New Old Stock Handlebar Switch - 169SA. The toggle switch is a 2 position switch. The OE part number is 60-4587
find out more

Price: £8.00 (Excluding VAT at 20%)

Road Fund Licence/Tax Disc Holder with screw on bezel. Made from stainless steel, this is a superior quality, water-proof holder manufactured by Halcyon and made in England.
find out more

Price: £25.00 (Excluding VAT at 20%)

Polished stainless steel brake arm/lever for the rear conical hub. This has been machined with Triton and other cafe racers in mind. The brake arm has a rectangular hole. We also stock the arm with the square hole - listed separately. The arm is 4 inches long.
find out more

Price: £25.00 (Excluding VAT at 20%)

Polished stainless steel brake arm/lever for the rear conical hub. This has been machined with Triton and other cafe racers in mind. The brake arm has a square hole. We also stock the arm with the rectangular hole - listed separately. The arm is 4 inches long.
find out more

Price: £90.00 (Excluding VAT at 20%)

Engine steady designed and made in England for the Cafe Racer and Triton enthusiast, this engine steady is fully adjustable. The polished plate bolts to the cylinder head. This will fit the 8-stud cylinder head as well. The hole in the centre of the plate gives you access to the 9th stud.
find out more

Price: £115.00 (Excluding VAT at 20%)

A pair of custom made, alloy finned exhaust clamps with 1 3/4 inch internal diameter to fit the Triumph 650cc and 750cc twins. These are superbly made from billet aluminium. The clamps are 1 1/4 inches deep with a 3 inch external diameter. These will not rust or go blue! They are ideal for cafe racers and custom bikes - Tritons etc. The clamps fasten with 2 stainless steel allen bolts - not shown.
find out more

Price: £250.00 (Excluding VAT at 20%)

Fork yokes for Norton or Triton made from cast and polished Dural. These superb yokes are made to racing specifications and have 7 inch centres. The top yoke is similar in design to the John Tickle top yoke. The stem is 7/8 inch diameter. These are precision made in England. They are designed for Roadholder forks and for the Featherbed frame.
find out more

Price: £295.00 (Excluding VAT at 20%)

Fork yokes for Norton or Triton made from cast and polished Dural. These superb yokes are made to racing specifications and have 7 3/8 inch centres. The stem is 7/8 inch diameter. These are precision made in England. They are designed for Roadholder forks and for the Featherbed frame.
find out more