Main Pages

Best Selling Products

Alloy Handlebar Clamp for the 169SA Switch

Alloy Handlebar Clamp for the 169SA Switch


Price: 10.00 (Excluding VAT at 20%)

Aluminium Handlebar Clamp for the Lucas 169SA switch assemblies. The clamp secures the switch half to the handlebar and has the pivot for the clutch or brake lever. This is a second-hand clamp in very good condition but may need polishing.
find out more

 

2 inch Ammeter White Face 6v

2 inch Ammeter White Face 6v


Price: 20.00 (Excluding VAT at 20%)

Ammeter with 2 inch diameter body and white face reading 8 - 0 -8 for 6v systems.
find out more

 

Speedo or Tacho Bracket - Polished Stainless Steel - Triton or Cafe Racer

Speedo or Tacho Bracket - Polished Stainless Steel - Triton or Cafe Racer


Price: 21.00 (Excluding VAT at 20%)

Polished stainless steel bracket for the speedometer or rev counter/tachometer. The clock bracket is secured to the top of the fork leg, fastened with the fork top nut. These are designed with cafe racer - Triton - Norbsa, Tribsa etc in mind. Once the clock is fitted, the bracket all but disappears from view giving a very smart, minimalist look to your cafe racer. The bracket that is on view is beautifully polished.
find out more

 

Chromed Tail Light Bracket with Stop and Tail Light - Custom Triton Cafe Racer

Chromed Tail Light Bracket with Stop and Tail Light - Custom Triton Cafe Racer


Price: 29.16 (Excluding VAT at 20%)

Chromed tail light bracket with replica Lucas L564 stop and tail light. The chromed tail light is approx 140 mm long from the back of the bracket to the end of the tail light and approx 180mm wide across the number plate mount. This tail light is ideal for cafe racers such as Tritons and custom bikes. There is a single mounting hole at the back of the tail light and 2 beneath the stop and tail light for fixing to the mudguard. There are 2 slots for fixing the number plate.
find out more

 

Brake Arm/Lever - Triumph BSA Rear Conical Hub

Brake Arm/Lever  - Triumph BSA Rear Conical Hub


Price: 25.00 (Excluding VAT at 20%)

Polished stainless steel brake arm/lever for the rear conical hub. This has been machined with Triton and other cafe racers in mind. The brake arm has a rectangular hole. We also stock the arm with the square hole - listed separately. The arm is 4 inches long. The arm is raised by 5/8 inch at the bend.
find out more

 

Lucas 169SA Alloy Dip Switch Half - second hand

Lucas 169SA Alloy Dip Switch Half - second hand


Price: 35.00 (Excluding VAT at 20%)

A genuine, second hand, alloy dip switch with 2 push buttons as fitted to the Triumph oil in frame models, the BSA B25, B50 oil in frame models, A65 and Norton Commando. The swtich toggle lever is diamond shaped. The switch is in good condition.
find out more

 

New Products

John Tickle New Old Stock Clip On Handlebars - 1 5/16 34mm Fitting

John Tickle New Old Stock Clip On Handlebars - 1 5/16  34mm Fitting


Price: 65.00 (Excluding VAT at 20%)

A pair of chromed, new old stock, genuine John Tickle clip on handlebars in their original box. The clip ons are 1 5/16 inch fitting - 34mm. The clip ons have a handlebar measuring 8.5 inches long (215 mm). The bracket is 1 5/8 inches deep fastened with 2 allen/hexagonal socket screws. These have a very slight angle. They are photographed with a different view, click on More to view the other photograph. The John Tickle reference is CO7 A Type.
find out more

 

John Tickle New Old Stock Clip On Handlebars - 1 3/8 36 mm fitting

John Tickle New Old Stock Clip On Handlebars - 1 3/8 36 mm fitting


Price: 65.00 (Excluding VAT at 20%)

A pair of new old stock, chromed clip on handlebars made by John Tickle (Racing Equipment) in the 1960s. These clip ons are a cross-over design - the handlebar crosses across the fork bracket. The handlebar section is 7/8 inch 22mm diameter and 9 3/4 inches long (250 mm). The fork bracket is 1 5/8 inches deep fastened with 2 allen/hexagonal socket screws. There is another photograph of the clip ons showing the angle of the handlebar, click on More to see the other photographs. The John Tickle reference number is CO30. The handlebars are in their original box.
find out more

 

John Tickle Clip On Handlebars - New Old Stock - 1 3/8 inch 34.5mm

John Tickle Clip On Handlebars - New Old Stock - 1 3/8 inch 34.5mm


Price: 65.00 (Excluding VAT at 20%)

A new old stock pair of John Tickle clip on handlebars in their original box with 1 3/8 inch 34.5mm fitting. These are cross-over tyep - where the bar crosses across the fork bracket. The fork bracket is 1 5/8 inches deep with 2 allen/hexagonal socket screws to fasten it. The handlebar is 7/8 inch 22mm diameter. There is a slot on the underside of the bar to enable cables to be threaded through the bar. The handlebar is 10 3/4 inches long (275 mm). There are other photos of these clip ons. Click on the More button. The John Tickle reference no is CO28.
find out more

 

John Tickle Clip On Handlebars - New Old Stock - 1 1/4 in 32mm

John Tickle Clip On Handlebars - New Old Stock - 1 1/4 in 32mm


Price: 65.00 (Excluding VAT at 20%)

A new old stock pair of chromed clip on handlebars made by John Tickle (Racing Equipment). These handlebars are a cross over design - the handlebar crosses across the fork bracket. The handlebar is 7/8 inch 22mm diameter; the fork bracket is 1 /4 inch 32mm internal diameter. The fork bracket is 1 5/8 inches deep. It fastens with 2 allen/hexagonal socket screws. The handlebar it 9 3/4 inches long (250 mm). The John Tickle reference number is CO15.


find out more

 

John Tickle Clip On Handlebars - New Old Stock - 1 5/16 inch 34 mmFitting

John Tickle Clip On Handlebars - New Old Stock - 1 5/16 inch 34 mmFitting


Price: 65.00 (Excluding VAT at 20%)

A pair of NOS, chromed John Tickle clip on handlebars in their original box. The handlebars are a cross-over type, the handlebar crosses across the fork bracket. The fork bracket is for 34 mm or 1 5/16 inch diameter forks. The fork bracket fastens with 2 allen/hexagonal socket screws. The handlebar itself is 7/8 inch 22mm diameter and is 10 1/2 inches long.

The handlebar section is angled down as you would expect for clip-ons. The fork bracket is 1 5/8 inches deep.

The chrome finish is good These are new old stock - not brand new. Please look at the photographs for details.
find out more

 

John Tickle Clip On Handlebars - New Old Stock - 34mm Cross Over Type

John Tickle Clip On Handlebars - New Old Stock - 34mm Cross Over Type


Price: 65.00 (Excluding VAT at 20%)

A pair of NOS, chromed John Tickle clip on handlebars in their original box. The handlebars are a cross-over type, the handlebar crosses across the fork bracket. The fork bracket is for 34 mm or 1 3/8 inch diameter forks - ideal for Norton Short Roadholder forks. The fork bracket fastens with 2 allen/hexagonal socket screws. The handlebar itself is 7/8 inch 22mm diameter and is 9 1.2 inches long.

The handlebar section is angled down as you would expect for clip-ons. The fork bracket is 1 5/8 inches deep.

The chrome finish is good but not perfect. These are new old stock - not brand new. Please look at the photographs for details.
find out more

 

On Line Catalogue  | Gaskets |  Engine Gasket Sets

Engine Gasket Sets

On Line Catalogue  | Gaskets |  Engine Gasket Sets

Engine Gasket Set - BSA D5 and D7 Bantam - HE067

Engine Gasket Set - BSA D5 and D7 Bantam - HE067

In stock


Price: 15.00 (Excluding VAT at 20%)

Quantity:

New old stock engine gasket set for the BSA Bantam models D5 Super and D7 1958 on. The gasket set is still in its unopened, original packaging and has the reference HE067. Click for more...

Engine Gasket Set - BSA A50 500cc OHV Twin 1962 on - GB274

Engine Gasket Set - BSA A50 500cc OHV Twin 1962 on - GB274

In stock


Price: 20.00 (Excluding VAT at 20%)

Quantity:

New Old Stock Gasket SEt for BSA A50 500cc OHV Twin 1962 on. It contains a copper composite cylinder head gasketThis was made by Britax (London) Ltd and has the reference GB274. Click for more...

Engine Gasket Set - BSA M24 500cc OHV Gold Star 1939

Engine Gasket Set - BSA M24 500cc OHV Gold Star 1939

In stock


Price: 30.00 (Excluding VAT at 20%)

Quantity:

New Old Stock Gasket Set for the BSA Model M24 500cc OHV Gold Star of 1939. This is still sealed in its original paper envelope/packet. The reference on the packet is B11 39. Click for more...

Engine Gasket Set - BSA B34 500cc Gold Star 1949

Engine Gasket Set - BSA B34 500cc Gold Star 1949

In stock


Price: 30.00 (Excluding VAT at 20%)

Quantity:

New Old Stock Gasket Set for the BSA B34 500cc Gold Star model of 1949. This is still sealed in its original paper envelope/packet. The Set No is B7 49.
Click for more...

Engine Gasket Set - BSA B34 500cc OHV Competition 1954-55

Engine Gasket Set - BSA B34 500cc OHV Competition 1954-55

In stock


Price: 30.00 (Excluding VAT at 20%)

Quantity:

New Old Stock Gasket Set for the BSA B34 500cc OHV Gold Star Competition Model 1954-55. This is still sealed in its original paper envelope/packet. The reference on the set is B8 54.
Click for more...

Engine Gasket Set - BSA B34 500cc OHV Gold Star 1952-53

Engine Gasket Set - BSA B34 500cc OHV Gold Star 1952-53

In stock


Price: 30.00 (Excluding VAT at 20%)

Quantity:

New Old Stock Gasket Set for the 500cc OHV B34 Gold Star 1952-53. The gasket set is still sealed in its original paper envelope/packet. It has the reference B9 52. Click for more...

Engine Gasket Set - BSA B31 and B32 350cc OHV 1946

Engine Gasket Set - BSA B31 and B32 350cc OHV 1946

In stock


Price: 20.00 (Excluding VAT at 20%)

Quantity:

New Old stock Gasket Set for the BSA B31 and B32 350cc OHV models for 1946. The gasket set is sealed in its original paper envelope/packet. The reference on the label is B3/46.
Click for more...

Engine Gasket Set - BSA B31 and B32 350cc OHV Competition Models 1950-53

Engine Gasket Set - BSA B31 and B32 350cc OHV Competition Models 1950-53

In stock


Price: 20.00 (Excluding VAT at 20%)

Quantity:

New Old Stock Gasket Set for the BSA B31 350cc OHV and B32 350cc OHV Competition Models with alloy cylinder head from 1950 - 53. This gasket set is still sealed in its original paper envelope/packet. It has set no B5 50 reference on it.
Click for more...

Engine Gasket Set - BSA A75 Rocket 3 - Triumph T150 Trident - 1969-72 - BSA TRI 825 - Made in England

Engine Gasket Set - BSA A75 Rocket 3 - Triumph T150 Trident - 1969-72 - BSA TRI 825 - Made in England

In stock


Price: 63.34 (Excluding VAT at 20%)

Quantity:

Quality engine gasket set suitable for the BSA A75 Rocket III and Triumph T150 Trident 3 cylinder motorcycles from 1969-72. The engine gasket set is made in England and has the OE part No 825 BSA/TRI. Colours of the gaskets may vary. More...

Engine Gasket Set - BSA A75 Rocket 3 - Triumph T150 Trident with cylinder head gasket - TRI/BSA 837 - Made in England

A good quality engine gasket set suitable for the BSA 750cc OHV 3 cylinder Rocket III A75 and the Triumph 750cc (45 cu in) 3 cylinder model Trident T150 from 1972-75. This gasket set includes a composite cylinder head gasket. Made in England, this is a good quality gasket set. Colours of the gaskets may vary. More...

Gasket Set - 1550cc Harley Davidson - Part No SS0161-0

Gasket Set - 1550cc Harley Davidson - Part No SS0161-0

In stock


Price: 30.00 (Excluding VAT at 20%)

Quantity:

Gasket Set for a 1550 cc Harley Davidson. The cylinder head gaskets have the4 part no 16787-99A stamped onto them. The gasket set has te part no SS0161-00 T-157. Please check the part number with your spare parts list. Click for more...

Gasket Set - New Imperial Model 100 350cc Clubman 1937-38 - NI 4

Gasket Set - New Imperial Model 100 350cc Clubman 1937-38 - NI 4

In stock


Price: 30.00 (Excluding VAT at 20%)

Quantity:

New old stock gasket set for the pre-war New Imperial Model 100, 350cc Clubman 1937-38. This is still in its original, unopened, packaging. It has the rererence NI 4. Click for more...

Gasket Set - New Imperial Models 36, 36DL, and 90 1937-38 - NI 2

Gasket Set - New Imperial Models 36, 36DL, and 90 1937-38 - NI 2

In stock


Price: 30.00 (Excluding VAT at 20%)

Quantity:

New old stock Gasket Set for the pre-war New Imperial Models 36 adn 36DL 250cc Unit Construction and Model 90 250cc Clubman 1937-38. The gasket set is in its original, unopened, packaging. It has the reference NI 2. Click for more...

Engine Gasket Set - Norton 500cc 600cc - 255 NOR

Engine Gasket Set - Norton 500cc 600cc - 255 NOR

In stock


Price: 43.00 (Excluding VAT at 20%)

Quantity:

Engine gasket set suitable for the Norton 500cc and 600cc OHV 88 Dominator Twin 1948-66, Model 77 1957 - 58, and Model 99 1956-62. The gasket set contains a copper head gasket and is made in England. Click for more...

Engine Gasket Set - Norton 650cc - 261 NOR

Engine Gasket Set - Norton 650cc - 261 NOR

In stock


Price: 44.80 (Excluding VAT at 20%)

Quantity:

Engine gasket set suitable for the Norton 650cc OHV Manxman Dominator 1961-70. The gasket set contains a copper head gasket and is made in England. Click for more...

Engine Gasket Set - Norton 750cc - 267 NOR

Engine Gasket Set - Norton 750cc - 267 NOR

In stock


Price: 43.95 (Excluding VAT at 20%)

Quantity:

Engine gasket set suitable for the Norton 750cc OHV Atlas 1962-66. The gasket set contains a copper head gasket and is made in England. Click for more...

Engine Gasket Set - Norton 750cc - 269 NOR

Engine Gasket Set - Norton 750cc - 269 NOR

In stock


Price: 34.75 (Excluding VAT at 20%)

Quantity:

Engine gasket set suitable for the Norton 750cc OHV Commando Fastback 1968-73. The gasket set contains a copper head gasket and is made in England. Click for more...

Engine Gasket Set - Norton 850cc - 271 NOR

Engine Gasket Set - Norton 850cc - 271 NOR

In stock


Price: 45.00 (Excluding VAT at 20%)

Quantity:

Engine Gasket set suitable for the Norton 850cc Commando with Electric Start 1973 on. The gasket set contains a copper head gasket and is made in England. Click for more...

Engine Gasket Set - Norton 850cc - 270 NOR

Engine Gasket Set - Norton 850cc - 270 NOR

In stock


Price: 45.00 (Excluding VAT at 20%)

Quantity:

Engine Gasket Set for the Norton 850cc Commando 1973-75. The gasket set contains a copper head gasket and is made in England. Click for more...

Engine Gasket Set - Triumph 500cc OHV 1958-1966 - 814B TRI

Engine Gasket Set - Triumph 500cc OHV 1958-1966 - 814B TRI

In stock


Price: 37.44 (Excluding VAT at 20%)

Quantity:

A complete engine gasket set suitable for the 500cc OHV Triumph motorcycles
5TA Speed Twin 1958-1966,
T100A and Tiger 100 SS 1960 to 1966

The gasket set contains a thick copper cyllinder head gasket and is made in England. It has the reference 814B TRI. Click for more...

Engine Gasket Set - Triumph 500cc OHV 1970-73 - 828 TRI

Engine Gasket Set - Triumph 500cc OHV 1970-73 - 828 TRI

In stock


Price: 38.11 (Excluding VAT at 20%)

Quantity:

Complete engine gasket set suitable for the Triumph 500cc OHV T100T, Daytona, Super Sports T100S and Tiger 100 from 1970 to 1973. The set includes a copper cylinder head gasket. The gasket set is made in England and has the reference 828 TRI. Click for more...

Engine Gasket Set - Triumph Trident T160V, 750cc 3 Cylinder with Cylinder Head Gasket - 1975-77 - 839 TRI - Made in England

A quality engine gasket set suitable for the Triumph 750cc OHV (45 cu inch) Electric Start 3 cylinder Trident T160V with copper cylinder head gasket. The gasket set is for Triumph T160V motorcycles 1975-77. OE Part No 839 TRI. This is a quality engine gasket set made in England. Colours of the gaskets may vary. More...

Engine Gasket Set - Triumph 650cc - 826 TRI

Engine Gasket Set - Triumph 650cc - 826 TRI

In stock


Price: 36.11 (Excluding VAT at 20%)

Quantity:

Engine Gasket Set suitable for the Triumph 650cc (40 cu in) OHV Trophy TR6 and Bonneville T120 1969-70. The gasket set contains a copper head gasket and is made in England. Click for more...

Engine Gasket Set - Triumph 650cc - 832 TRI

Engine Gasket Set - Triumph 650cc - 832 TRI

In stock


Price: 36.11 (Excluding VAT at 20%)

Quantity:

Engine Gasket Set suitable for the Triumph 650cc OHV Trophy TR6C, Bonneville T120R, Tiger TR6R 1971 early 1972. The gasket set contains a copper head gasket and is made in England. Click for more...

Engine Gasket Set - Triumph 650cc - 822 TRI

Engine Gasket Set - Triumph 650cc - 822 TRI

In stock


Price: 34.11 (Excluding VAT at 20%)

Quantity:

Engine Gasket set suitable for the Triumph 650cc OHV T120 Bonneville, Trophy TR 1967-68. The gasket set has a copper head gasket and is made in England. Click for more...

Engine Gasket Set - Triumph 650cc - 818 TRI

Engine Gasket Set - Triumph 650cc - 818 TRI

In stock


Price: 36.76 (Excluding VAT at 20%)

Quantity:

Engine gasket set for Triumph 650cc OHV T120 Bonneville, Trophy TR6, Thunderbird 6T from 1963 to 1966. This gasket set contains a copper head gasket and is made in England Click for more...

Engine Gasket Set - Triumph 750cc Twin - 836 TRI

Engine Gasket Set - Triumph 750cc Twin - 836 TRI

In stock


Price: 33.83 (Excluding VAT at 20%)

Quantity:

Engine gasket set for the Triumph 750cc OHV TR7 and T140 1973 onwards. The gasket set includes a copper head gasket. The Part No is 836 TRI. Click for more...

Engine Gasket Set - BSA A75 Rocket 3 - Triumph T150 Trident with cylinder head gasket - TRI/BSA 837 - Made in England

A good quality engine gasket set suitable for the BSA 750cc OHV 3 cylinder Rocket III A75 and the Triumph 750cc (45 cu in) 3 cylinder model Trident T150 from 1972-75. This gasket set includes a composite cylinder head gasket. Made in England, this is a good quality gasket set. Colours of the gaskets may vary. More...

Engine Gasket Set - BSA A75 Rocket 3 - Triumph T150 Trident - 1969-72 - BSA TRI 825 - Made in England

Engine Gasket Set - BSA A75 Rocket 3 - Triumph T150 Trident - 1969-72 - BSA TRI 825 - Made in England

In stock


Price: 63.34 (Excluding VAT at 20%)

Quantity:

Quality engine gasket set suitable for the BSA A75 Rocket III and Triumph T150 Trident 3 cylinder motorcycles from 1969-72. The engine gasket set is made in England and has the OE part No 825 BSA/TRI. Colours of the gaskets may vary. More...

Engine Gasket Set - Royal Enfield 500cc Twin Late 1952-55

Engine Gasket Set - Royal Enfield 500cc Twin Late 1952-55

In stock


Price: 20.00 (Excluding VAT at 20%)

Quantity:

New old stock, gasket set for the Royal Enfield 500cc Twin models from late 1952 to 1955. The reference on this gasket set is RE15a. This is a new old stock gasket set and is unopened. It contains 2 copper cylinder head gaskets as well as the other gaskets required.

Click for more...

On Line Catalogue  | Gaskets |  Engine Gasket Sets

Chris Knight Motorcycles Ltd