Main Pages

Best Selling Products

Alloy support table for central alloy oil tank - Norton Featherbed frame - Triton - Cafe Racer

Alloy support table for central alloy oil tank - Norton Featherbed frame - Triton - Cafe Racer


Price: 21.00 (Excluding VAT at 20%)

Alloy table with foam cushion specifically to support the alloy central oil tank fitted to Norton Featherbed frames. Dimensions: 4.5 inches x 2.5 inches. The "legs" are qt 3 inch apart and are 2 inches long. The table fits under the oil tank and between the engine plates which should measure 3 1/4 inches. Please check that this is suitable for your bike. This is designed to fit a Triton/Cafe racer with Triumph gear box in situ that has not been altered. Simply put the table into position and when happy with the location, drill through the sides of your engine plates and through the table to allow for the screws (not supplied) to hold in position.


find out more

 

External Spring Kit - Norton Short Roadholder Forks

External Spring Kit - Norton Short Roadholder Forks


Price: 75.00 (Excluding VAT at 20%)

External spring kit for the Norton Short-Roadholder forks comprising a pair of chromed progressive fork springs, internal aluminium fork rods and machined alloy fork seal holders. The fork seal holders have recesses in them for tightening. They also have a seal in the top which acts as a "bed" for the fork springs. This does not replace the fork seal in the forks themsevles. The aluminium rods are slightly longer than standard to allow for more adjustment. This External Spring Kit is made by Dresda with Tritons in mind.
find out more

 

Alloy Top Spring Cups for External Springs - Norton Short Roadholder

Alloy Top Spring Cups for External Springs - Norton Short Roadholder


Price: 24.59 (Excluding VAT at 20%)

Alloy Top Spring Cups for use with the external springs on the Norton Short Roadholder forks. These are made in England from Dural aluminium. They are designed to fit the tops of the external springs and would seat themselves with the pressure from the spring beneath the bottom yoke. The quality is superb. Although not an essential part of the external spring kit, some owners prefer the look of the forks with alloy spring cups top and bottom.
find out more

 

Lucas Handlebar Switch - Indicator Switch with Handlebar Bracket - Second Hand - 169SA

Lucas Handlebar Switch - Indicator Switch with Handlebar Bracket - Second Hand - 169SA


Price: 52.70 (Excluding VAT at 20%)

Lucas used indicator switch with handlebar bracket. The toggle switch is black as are the 2 push button switches.
find out more

 

Decoke Gasket Set - Triumph 6T, TR6, TR110 - 1949-55 - 805 TRI

Decoke Gasket Set - Triumph 6T, TR6, TR110 - 1949-55 - 805 TRI


Price: 15.00 (Excluding VAT at 20%)

Decoke Gasket Set suitable for Triumph 6T Thunderbird with Iron Head, TR6 and TR110 from 1949 - 1955. The OE Part No is 805 TRI. Cylinder Head Gasket is NOT included in this set.
find out more

 

Cylinder Head Gasket - Thicker Copper - 650cc Triumph Pre Unit - 6T, T110, T120 - 70-3614

Cylinder Head Gasket - Thicker Copper - 650cc Triumph Pre Unit - 6T, T110, T120  - 70-3614


Price: 14.04 (Excluding VAT at 20%)

A copper head gasket for the 8 stud pre-unit Triumph 650cc twins: 6T, T110, T120. The head gasket is 80 thousands of an inch thick. The thicker head gaskets are used if the cylinder head has been skimmed.
find out more

 

New Products

Grimeca 4 Leading Shoe Brake Drum 230mm 9 inch - Triton - Ducati - Cafe Racer

Grimeca 4 Leading Shoe Brake Drum 230mm 9 inch - Triton - Ducati - Cafe Racer


Price: 975.00 (Excluding VAT at 20%)

Grimeca 4 Leading Shoe, 2 Sided Brake Drum in very good condition. The brake measures 230 mm 9 inches across the brake shoes, approx 10 inches across the brake plate. The hub is 4.5 inches wide 115 mm. It has a spindle: approx 9.5 inches long - 240 mm and 3/4 inch 20mm diameter. The brake drum has 36 spoke holes. The brake drum is fitted with green brake shoes - racing brake shoes.

It has the cable ferrule for the Grimeca speedo drive but the speedo drive is not in the hub.

Both brake plates have 3 mesh vent holes and an air scoop covered with mesh.
find out more

 

On Line Catalogue  | Oil Seals and O Rings |  Oil Seal - Triumph - 57-2641

Oil Seal - Triumph - 57-2641

Oil Seal - Triumph - 57-2641

In stock


Price: 2.00 (Excluding VAT at 20%)

Quantity:

Oil seal for the kickstart shaft on Triumph models. The OE No is 57-2641.


On Line Catalogue  | Oil Seals and O Rings |  Oil Seal - Triumph - 57-2641

Chris Knight Motorcycles Ltd