Main Pages

Best Selling Products

Genuine Lucas Flasher Unit 8FL - 12v

Genuine Lucas Flasher Unit  8FL - 12v


Price: 10.00 (Excluding VAT at 20%)

Genuine Lucas Flasher Unit for 12v systems.The Lucas reference no is 8FL36. Lucas part no is 35048. This is a new old stock item.
find out more

 

Fork Bush and Seal Kit - Norton Commando and Roadholders

Fork Bush and Seal Kit - Norton Commando and Roadholders


Price: 30.00 (Excluding VAT at 20%)

Bronze fork bushes and steel fork bushes with fork oil seals to give a complete set of bushes and seals for all the Norton Roadholder and Commando forks.
find out more

 

Lucas Light Switch Lucas Part No 31275 Triumph Part No 99-1211

Lucas Light Switch Lucas Part No 31275  Triumph Part No 99-1211


Price: 15.00 (Excluding VAT at 20%)

Genuine Lucas headlight switch as fitted to the Oil in Frame Triumph and BSA models. This switch rotates and switches on and off as you turn it clockwise. The Lucas part number is 31275. The Triumph part number is 99-1211. These switches good second hand or new old stock. There are 2 screw in terminals on the bottom of the switch.
find out more

 

Gaiters - BSA Triumph - 97-3535

Gaiters - BSA Triumph - 97-3535


Price: 12.50 (Excluding VAT at 20%)

Pair of fork gaiters for Triumph Models - 1968 to 1970 and BSA A75. OE No 97-3535.

Measurements: 6 3/4 inches long (un-stretched)
2 inch internal diameter at the top
2 inch internal diameter at the bottom
find out more

 

Champion black rubber plug cap

Champion black rubber plug cap


Price: 4.20 (Excluding VAT at 20%)

Champion black rubber plug cap - non resistor type.
find out more

 

Stainless Steel Battery Carrier - Triton - Cafe Racer

Stainless Steel Battery Carrier - Triton - Cafe Racer


Price: 50.00 (Excluding VAT at 20%)

Stainless steel battery carrier designed to fit the Norton Featherbed frame. The battery tray is 5 inches by 2 5/8 inches and is lined with a foam pad. The fitting bolt holes are 2 5/8 inches wide. There is a battery strap clipped to the tray and to the back of the carrier. The battery carrier/box attaches to the mounts where the rear engine plates bolt to the frame. This allows the battery to be positioned out of sight.

This has not been polished. It can be polished or painted or just left as it is - natural looking stainless steel.
find out more

 

New Products

Cafe Racer Seat - Triton Wideline - Black Leatherette with Red Piping

Cafe Racer Seat - Triton Wideline - Black Leatherette with Red Piping


Price: 110.00 (Excluding VAT at 20%)

A longer single seat for Triton and Cafe Racers. This seat has red piping right around the top of the seat and hump. The hump at the back is rounded. It has a square recess for acess to the central oil tank. It is unholstered in black leatherette. There are 4 "eyelets" on the underside the seat so you can insert your own fittings.

Measurements:

Overall Length 25 inches.
Width infront of Hump: 10.75 inches
Wideth at the front where it meets the tank: 10.5 inches.
find out more

 

Triton Racing Seat - Wideline in Black Leatherette with Red Piping

Triton Racing Seat - Wideline in Black Leatherette with Red Piping


Price: 105.00 (Excluding VAT at 20%)

A slightly different design with a shorter hump on the back that finished in a less pointed curve. The hole for access to the central oil tank is a different shape - more square. This again will fit Norton Wideline Featherbed framed cafe racers: Triton - Norvin - Norbsa etc. There are 2 bolts on the underside for fixing.

Measurements:

Overall Length: 20.5 inches
Width just in front of the hump: 11.5 inches
Width at the front where the seat meets the tank: 10.5 inches.


find out more

 

Triton Racing Seat - Norton Wideline - Black Gloss Finish with Red Piping

Triton Racing Seat - Norton Wideline - Black Gloss Finish with Red Piping


Price: 110.00 (Excluding VAT at 20%)

This single seat is made from fibreglass with leatherette seat covering for the Norton slimline frame. This is ideal for a Triton or other Norton Featherbed framed cafe racer. The seat is upholstered with black leatherette and has red piping. It has 4 bolts on the underside for fixing. The seat is made by Dresda.

Measurements:

Overall length : 21.5 inches
Width at back of seat-infront of hump : 10.75 inches
Width at the front of the seat where it meets the tank : 10.5 inches
find out more

 

Stainless Steel Battery Carrier - Triton - Cafe Racer

Stainless Steel Battery Carrier - Triton - Cafe Racer


Price: 50.00 (Excluding VAT at 20%)

Stainless steel battery carrier designed to fit the Norton Featherbed frame. The battery tray is 5 inches by 2 5/8 inches and is lined with a foam pad. The fitting bolt holes are 2 5/8 inches wide. There is a battery strap clipped to the tray and to the back of the carrier. The battery carrier/box attaches to the mounts where the rear engine plates bolt to the frame. This allows the battery to be positioned out of sight.

This has not been polished. It can be polished or painted or just left as it is - natural looking stainless steel.
find out more

 

Lucas Light Switch Lucas Part No 31275 Triumph Part No 99-1211

Lucas Light Switch Lucas Part No 31275  Triumph Part No 99-1211


Price: 15.00 (Excluding VAT at 20%)

Genuine Lucas headlight switch as fitted to the Oil in Frame Triumph and BSA models. This switch rotates and switches on and off as you turn it clockwise. The Lucas part number is 31275. The Triumph part number is 99-1211. These switches good second hand or new old stock. There are 2 screw in terminals on the bottom of the switch.
find out more

 

On Line Catalogue  | Oil Seals and O Rings |  Oil Seal - Triumph - 70-4578

Oil Seal - Triumph - 70-4578

Oil Seal - Triumph - 70-4578

In stock


Price: 2.35 (Excluding VAT at 20%)

Quantity:

Oil Seal for the Mainshaft High Gear, Clutch Back Plate. OE No 70-4578.


On Line Catalogue  | Oil Seals and O Rings |  Oil Seal - Triumph - 70-4578

Chris Knight Motorcycles Ltd