Price: £45.00 (Excluding VAT at 20%)

A pair of new old stock, chromed clip on handlebars made by Paul Dunstall. The handlebars have a 28mm / 1 1/8 inch diameter fitting. They have a bracket to fit over teh fork leg/stanchion which is then tightened with a bolt (not supplied). The handlebar itself is 8.5 inches long from the weld on the fork leg fitment. They have Dunstall stamped into the bracket.
find out more

Price: £60.00 (Excluding VAT at 20%)

External spring kit for the Norton Short-Roadholder forks comprising a pair of chromed progressive fork springs, internal aluminium fork rods and machined alloy fork seal holders. The fork seal holders have recesses in them for tightening. They also have a seal in the top which acts as a "bed" for the fork springs. This does not replace the fork seal in the forks themsevles. The aluminium rods are slightly longer than standard to allow for more adjustment. This External Spring Kit is made by Dresda with Tritons in mind.
find out more

Price: £15.00 (Excluding VAT at 20%)

Petrol tab with fuel filter and 1/4 gas connections at both ends. This is a main tap and has a tube inside the filter. The lever is flat. OE No 83-2800. The tap is made in England.
find out more

Price: £18.80 (Excluding VAT at 20%)

A pair of brake shoes to fit the BSA A7 and A10 with 7 inch brake drum. The part no is 65-5901.
find out more

Price: £4.00 (Excluding VAT at 20%)

Slide-in cable adjusters for clutch and brake levers
find out more

Price: £25.00 (Excluding VAT at 20%)

Genuine Lucas Ignition Switch - OE Part No 30608
find out more

Price: £14.71 (Excluding VAT at 20%)

A full set of oil seals to fit the Triumph T140 Bonneville and Triumph TR7 Tiger Engines. These are quality seals and have the part number 99-9957.
find out more

Price: £75.00 (Excluding VAT at 20%)

A pair of original, steel side panels painted a metallic red colour to fit the early BSA A65 and A50 models. These are in excellent condition - just need painting the colour you want. The panels have some of the fittings with them.
find out more

Price: £150.00 (Excluding VAT at 20%)

A complete new old stock, rear light assembly for Triumph and BSA models produced in 1971 and 1972. The steel carrier is painted black. The long stemmed indicators are genuine Lucas and the L679 stop and tail light is also genuine Lucas. This is a superb, new old stock tail light assembly - we only have one!
find out more

Price: £19.95 (Excluding VAT at 20%)

A very useful tool for the removal of Triumph and BSA Clutches. The sturdy square-section, steel, tubular handle provides enough tension to enable even the tightest nuts to be undone! The tool is chromed for durability. The handle is 1 inch square section steel approx 12.5 inches (315 mm) long. The clutch "plate" is 5 5/8 inches (150mm) diameter.
find out more

Price: £35.00 (Excluding VAT at 20%)

A NOS left hand side panel suitable for the BSA Barracuda and the early BSA Star Fire 1967-68. The side panel is made of fibre glass and has the oddie pins with it. It is in really good condition. There are no splits, cracks or dents in it.
find out more

Price: £20.00 (Excluding VAT at 20%)

A chromed decompression lever with fitting for 1 inch (25mm) handlebars. The lever is an original one and the chrome is bright and shiny. It would accommodate a 1/4 inch cable nipple. The lever is 4 inches long (100mm).
find out more